JX - 250 type tassel strip cutting machine
Motor: 370 w, power 220 v
Mechanical motion principle, manually adjust the feeding length, combined with electronic calculator and temperature controller, automatic cutting, automatic counting, automatic control moderate reaches preset cutting quantity automatically stop working. 0-200 mm, cut length cutter width is 250 millimeter, can crosswise function (0 degrees to 45 degrees of inclined long knife width 80 mm) hot and cold dual-use, replace the blade can cut adhesion of various shapes, is currently on the market only to cut leather sliver of special equipment.
Note: when using this machine cutting, to use, will not let other people close to; To adjust and repair the machine, to cut off the power supply, ensure safety; Rotating parts often should add oil.
When using this cutting machine, the first material device, and then open the front door, loosen the adjusting nut length, sleeve length adjustment on the spanner, by changing the length adjustment wrench to adjust the length of cutting out the need, and then lock length adjustment nut, and on the door, open the power switch, the counter set keys required for cutting the number of press the counter reset button again, the machine will automatically cutting materials, to set the number of automatically stop working. Counter on the right side of the switch to attune to the above, the number of saved can be saved after turn off the power supply the number of cutting out will not be lost.
Speed adjustment: according to the actual situation of cutting material adapted to adjust speed, adjust the location of the need to transform belt pulley cone, can change the speed cutting speed.